ECHO E1 EX Explosion Proof Digital Intercom Stations for IEC and European Applications
- Stainless steel hardware
- Super-bright LED indicator
- Tactile keypad
- Speed dial / auto conference
- Headset, gooseneck microphone and handset interface options
- Output to powered loudspeaker
- Hinged front cover
- Rated Type 4X and IP66
- CE Compliant
- For use in ATEX/IECEx Zone 1 and 2, IIB locations
Features
The E1-EX Series ECHO Intercom Stations provide safe and efficient two-way voice communications in ECHO Digital Intercom Systems. This ECHO Station is designed and approved for use in Zone 1 and 2 Hazardous Areas including ATEX/IEC EX Zone 1, Gas Group IIB locations.
The E1-EX Series provides instantaneous high-speed connections and clear, crisp digital voice quality. Each station offers single-button all call, priority emergency paging, group paging, speed dial, conference call, and relay output.
Any station can call any other station(s) in an ECHO Digital Intercom System. With the headset or gooseneck microphone options, each is capable of hands-free voice communication. Because the ECHO Digital Central Exchange provides 30 channels of simultaneous communication, calls are processed and connected immediately without dial tone or delay.
The keypad is designed to provide tactile and audible feedback (via external powered speaker) for positive activation. Each station may be programmed for four levels of privacy for receiving calls; non-private, semi-private, full privacy and do-not-disturb. Volume for voice and signal levels are easily adjusted on the keypad.
This station is constructed with a heavy duty, corrosion-resistant cast aluminum and a powder coated aluminum faceplate, equipped with weatherproof keypads, and is rated for use in Type 4X and IP66 dust- and water-tight applications.
Specifications
| Operating Voltage | 24VDC nominal (line driven from ECHO control) |
| Current Idle | 25mA |
| Current Connected | 100mA Maximum |
| Handset Microphone Type | Dynamic |
| Handset Material | Moulded Polycarbonate/ABS Blend |
| Handset Cord | Polyeurethane |
| Stubby Microphone Type | Dynamic |
| Stubby Mic Sensitivity | -54dBA |
| Stubby Mic Enclosure | Stainless steel |
| Audio Output | 2.7 Vrms / 1k Ohm load |
| Volume Control | Via Keypad - 30dB in ten steps |
| Ingress Protection IP66 (IP65 on handset) | |
| Line Attenuation | 24dBA@160kb/s Max |
| Loop Resistance | 170 Ohm Max |
| dB(c) @ 100' ** | 1.2 miles 2.0 kms Max |
| Cable | 3 x M20 |
| Operating Temperature Minimum | -40 °F |
| Operating Temperature Maximum | 149 °F |
| Termination | Din rail mount tensioned clamp terminals |
| Relay Switching Capacity | 3A at 240VAC |
| General Weight | 25 lb |
| Shipping Weight | 30 lb |
| Length | 20.630 in |
| Width | 14.130 in |
| Height | 13.630 in |
Resources
Product Literature
Ordering Info
Model Types
| MODEL | DESCRIPTION |
|---|---|
| E1-SM-EX | Stubby Microphone, 65mm |
| E1-JS-EX | Station with Jack Station/Headset connection |
| E1-HND-EX | Station with Handset |
| E1-GM3-EX | Gooseneck Microphone, 590mm |
| E1-GM2-EX | Gooseneck Microphone, 440mm |
| E1-GM1-EX | Gooseneck Microphone, 260mm |
