• Overview
  • Request Information
  • Specs
  • Buy

To order product literature, visit our Mulitmedia site.

Request Info

Contact Info:
*First Name:
*Last Name:
Address cont.:
Zip/Postal Code:
*Email Address:
Contact Request:
How you heard:
Please send me future information or news and sales promotions via e-mail.
* denotes required field

Technical Specs and Approvals

Approvals: Meets SAE J1849 and CCR (CAC) Title 13, article 8 requirements
for sound when coupled with any Federal Signal, SAE and CCR
approved speaker.
Audio Power: 45W in PA mode
Standby Current: 0.5 amps
Operating Temp.: -30˚C to +65˚C
Frequency Range: 700-1500 Hz
Input Voltage: 11-16VDC
Voltage Output: 62-66 Vrms peak-to-peak
Input Impedance (PA): 4000 ohms (nominal)
Auto Response: 300-3000 Hz +/- 3dB
Dim. (H x L x D): Control Head - 3.1 in x 6.8 in x 1.3 in (7.9cm x 17.2cm x 3.3cm)
SS200 Control Hd. - 3.1 in x 3.0 in x 1.3 in (7.9cm x 7.6cm x 3.3cm)
Amplifier - 2.3 in x 6.3 in x 6.4 in (5.9cm x 15.9cm x 16.2cm)
Ship Weight: Amplifier - 6.0 lbs (2.7 kg)
Control Head - 1.0 lbs (0.5 kg)


Audible Equipment may produce LOUD sounds necessary to request the right-of-way. Audible equipment may cause hearing damage. Wear hearing protection. Refer to the Installation Manual or call 800/433-9132 for further instructions.

Important Warning for Police Boats and Fire Rescue Boats

It has come to our attention that police boat and fire rescue boat sirens and speakers may subject persons operating those craft to sound pressure levels that can cause permanent hearing loss. We recommend that speakers be located as far forward on the boat as possible, as recommended in the SAE Recommended Practice J1849 "Emergency Vehicle Sirens". However, unprotected exposures of a sufficient duration to properly located siren speakers can still create a risk of hearing loss.

It is our recommendation that your siren speakers should be relocated and persons operating these craft should wear hearing protection when using the siren system.

Failure to comply with these recommendations may result in temporary or permanent hearing loss to operators and passengers of these vehicles.

Where to Buy

Select a Market. Select a Region.
Select a Country. State/Prov

With easy to operate rubberized push-button and slide switch control, the SmartSiren electronic siren and light control system is one of the most recognized control systems in the law enforcement industry. The SmartSiren system consists of a control head and separate amplifier/relay unit.

This electronic siren offers the standard siren tones (Wail, Yelp, Hi-Lo, Priority, Air Horn and Manual) with several additional features such as horn ring transfer, radio rebroadcast and PA (microphone sold separately).  The SmartSiren system drives 58-watt, 100-watt and 200-watt speakers.

For added versatility, the SmartSiren can be configured at the point of installation. In addition, the model SS2000SM-SD controls up to seven directional patterns of Federal Signal's six- or eight-lamp SignalMaster.

  • Electronic siren and light control combined
  • Easy action rubberized, back-lit push-buttons
  • Power versatility 58, 100 and 200 watts
  • Optional SignalMaster directional light control
  • Functions programmable at the point of installation
  • Easy installation with supplied connectors